Sunday, 10 April 2011

SOLO MOUNTAINEERING.(Stoves,Slings,and other things!)


I fell in love with the Jetboil from the moment it hit the retail market.Now i am on my second one,as the first is in tiny bits at the bottom of a big Swiss mountain.The main problem with it has allways been its londitudinal shape and wobbly base-bracket which makes it very easy to knock over.Which is how i lost the first one!
I never cook anything in mine,its solely for heating water for drinks and dehydrated ration packs,and melting snow and ice for water replenishment.I advise others not to cook in them either as they are hell to scrub out!Two tips to pass on,-Allways carry a second ignition source(lighter or matches),dont trust "Piso" ignition systems.Mark the gas cannister usage(on the can) as theres nothing worse than running out of gas when you need it!
I finally figured out how to secure the stove after seeing Andy Kirkpatricks effort on his blog .Mine is lighter and not so ellegant as his.

All i did was fit a 6inch wide "marine stainless steel" Jubilee Clip,bought from my local chandlery,and fastened 2-feet of braided-brass "picture frame wire" to each side,in order to hang it.I prefered this wire as it is bendy and can be twisted around protection to lock the stove in place.Its allso imensely strong stuff! There are loads of great mountain stoves on the market of course!? But this one suits my budget and soloing needs perfectly!


ETRIER,means "stirrup" in French and is a simple piece of kit that is incredibly useful for giving a solo-climber a "leg up",especially creaky old codgers like me! You can buy a 5-step Etrier for about £25,or make your own out of Nylon Slings.I prefer nylon as its cheaper,easier to pull apart after use,and less likely to rip if you use crampons on it!
Dyneema on the other hand is stronger but very easy to damage,more costly,and locks up solid when you knot it and add weight. Theres a strange little video on (a useful and fun website)that shows you how to rig Etrier with simple overhand knots,if your not sure how to do it?!
Make sure you make the steps with enough room to take an Alpine Boot,and dont make your etrier too long(4 to 5 steps are fine!).Its better and more useful to carry two small ones,than one long one! Practice rigging and using them often as they can be very unstable to climb on,and its best to stay familiar with them.
Peggy demoing finished variation.

Use a Krab or two,to counterweight the ends,or the slightest wind will blow the thing up around your ears and drive you nuts! Attach the top ends to a second sling or lanyard(one full arms length long),then attach that to your belay-loop on your harness.This sling or lanyard must be able to take your full weight and can be used as protection ,when clipping into a gear placement in the rock. It will allso save you money and a lot of tears and pain if you should drop the Etrier.
Rob doing "bounce test".

Finally make sure you bounce-test the device before you commit to useing it,in the same way you test a gear placement when you clip an Etrier to it and commit your body weight.
Technically,using Etriers can be considered as "Aid Climbing" even if only used to get you over a small,difficult, rock or ice step or to escape a crevasse!? The lightweight and very simple system that i employ,"must not" be construed as suitable for Technical Aid Climbing or Big Wall Aid Climbing! That is a very different skill-set alltogether,that should be learned from experts in that field.I have "no" skills or expierience in that type of climbing at all!
My use of these techniques and devices are simple systems to help me overcome short difficult pitches,where my solo-climbing abilities are overstretched!

Best to all,and good climbing!


No comments:

Post a Comment

To comment,please become a member of this blog.This has become nescesary due to Trolls and Spammers.All comments are moderated before publishing.Thanks for your patience. Rob

Note: only a member of this blog may post a comment.